A router may be defined as an electronic device which is used for forwarding data packets via computer networks. Two or more data lines from separate networks are connected with a router. Its job is to read and direct the in coming data packets, to their ultimate destinations. The most common forms of routers are the household routers and small office routers, which are designed for normal passage of data.
Basic Routing Problems
Surveys have revealed that several users face various problems with routers, pretty frequently. Some of them have been discussed below-
Problem #1
'I can't set my router to the Enable Mode'
Solution
In order to resolve this issue, you may follow these simple steps-
i) First of all you have to make sure that you have entered the password correctly. Carefully examine whether the password is case sensitive or not, and act accordingly.
ii) Also check whether the password which you have is the proper one. If it is not the proper one, you may perform the password recovery process.
iii) If you are able to discover the correct password, your problem will be resolved. If not, you need to contact for Technical Support.
Problem #2
'I can't connect with other IP networks. Whenever I try to connect, Router Routing Table displays network not listed, or listed as unreachable'
Solution
It might be the case that there may one or more routers present, between your router and the network you are trying to connect to. In such a scenario, you may follow the following steps-
i) First of all you need to confirm whether your router is connected to your targeted network directly or via one or more routers. If it is not connected directly, you need to get in touch with the network administrator.
ii) If it is directly connected, you need to obtain the IP address along with the password of the router which is directly connected to your targeted network.
iii) After that you can telnet to that router and set it to enable mode.
There are lots of problems related to the router. Many of them may not be resolved by a common user. At that point a user should contact with a technical person.

